كيفية اختيار آلة مسحوق الحجر المهنية
كيفية اختيار آلة مسحوق الحجر المهنية ما نوع الآلة التي يمكنها سحق مسحوق الحجر؟ ما هي أفضل آلة لمسحوق الحجر…
Preparations before the jaw crusher starts
1. Carefully check whether the lubrication of the bearing is good, and whether there is enough grease at the joint of the inner bracket of the bearing.
2. Carefully check whether all fasteners are fully tightened.
3. Whether the protective device is in good condition, if any unsafe phenomenon is found, it should be eliminated immediately.
4. Check whether there are ore or other sundries in the crushing chamber, if any, it should be eliminated immediately.
Start-up of jaw crusher
1. After inspection, it is proved that the machine and transmission parts are in normal condition before starting.
2. The machine can only be started under no-load conditions.
3. After starting, if any abnormal situation is found, it should be stopped immediately, and it can be restarted only after the cause is identified and the hidden danger is eliminated.
Maintenance and use of jaw crusher
1. After the crusher is in normal operation, the material can be fed.
2. The material to be crushed should be evenly added into the crushing cavity, and side feeding should be avoided to prevent sudden load changes or unilateral sudden increases.
Application of 60×100 Jaw Crusher
jaw crusher application
The sealed jaw crusher is mainly used for medium and fine crushing of ore, coal or other medium-strength materials. The crushing method is a curved extrusion type, which relies on two wear-resistant jaw plates to crush the material. The crushed material should be brittle, the shape of the crushed material is mostly flake, and the compressive strength of the crushed material should not exceed 80MPa. If the moisture content of the material exceeds 8%, the feeding will not be smooth.
The machine is reasonably designed, easy to maintain, and easy to operate. It has the characteristics of large crushing ratio, uniform material particle size, convenient adjustment, convenient material receiving, and less dust in full sealing. With advanced structure, reasonable design, stable operation, low vibration, tight sealing and low noise, it has been widely used in metallurgy, mining, coal, coking and other industries. The feeding and discharging of the small machine are all sealed, mainly used in the laboratory.
Jaw Crusher Features
Reasonable design, simple structure, easy operation and use, high crushing force and high efficiency, and the use of adjustable crusher.
