The reason for the decline in the production capacity of the sand making machine

First of all, the effect of different stones crushed by the same sand making machine is different. Because the hardness of the stone in each area is different. If the hardness of the material is high, the crushing process will be longer. The consumption of wearing parts of the sand making machine is also large. Therefore, it is necessary to customize the wear-resistant material and model of the sand making machine according to the different hardness of the stone. This can effectively avoid unnecessary waste, reduce equipment damage and reduce the frequency of equipment downtime for maintenance. In this way, the identification production capacity of the equipment is improved in disguise, and greater benefits are obtained for the production project.

Secondly, the auxiliary equipment of the sand making machine should be in place. After repeated observation of the sand making machine, the optimal particle size of the sand making machine feed is between 3-5 cm. Too big or too small stones will affect the output of the sand making machine. Therefore, in the production process, the production of large stone should be equipped with a fine jaw crusher to provide the best grain shape for the sand making machine.

The third point is that the humidity and viscosity of the material will also have a certain impact on the sand making process. Materials that are too hot will have a certain viscosity or humidity. This can cause equipment jams during production. In view of this situation, a sand making machine that does not block or is not afraid of sticky materials should be selected.

The last point is the power of the sand making machine motor. Equivalent motors need to be configured according to the model of the sand making machine. The power supply should be equipped in strict accordance with the factory requirements. Otherwise, if the power cannot be reached or is too high, the particle size of the sand making machine will be uneven, the return material will increase, and the output will decrease.

Previous: Introduction of new sand making machine for river pebble

Next: Scientifically select reasonable sand making machine equipment to increase output