What to do if the jaw crusher is blocked

Jaw crushers are widely used in mineral processing plants, with large inertia, harsh working conditions, and heavy-duty coarse crushing equipment. During normal operation, the crusher was clogged. How do we fix it?

During the material crushing process, the jaw crusher will not get stuck under the material of the carding machine, because the ore material with high moisture content will enter the crushing chamber during the working process, and the crusher will contain water. The material is broken into small pieces which will become small pieces of sticky material which will stick to each other and jam between the two jaws in the crushing chamber causing a jam or possible breakage. The material is mixed with viscous mud, so that the material sticks to the crushing cavity and is blocked.

Solve the clogging phenomenon: Before using the jaw crusher, the parameters of the crusher, especially the material performance requirements, should be clarified. Appropriate materials should be used according to the material requirements of the crusher. If the production process requirements of the crusher are not met, such as the temperature is too high or the moisture is too much, corresponding processing work can be carried out first to make the material meet or meet the requirements of the jaw crusher, such as as much as possible.

One way is: When the material is sent to the crushing chamber for crushing, trained technicians will perform the operation of the crusher to reduce the occurrence of clogging.

Jaw crushers are commonly used in gravel fields. Jaw crushers use tweezers to squeeze each other, crushing the stones in the middle. The stone in the middle is crushed, broken, cracked, etc. Type E circuit breakers are easy to use, but easy to use. A common problem with crushing equipment is high mechanical noise. With the development of crushing technology and the emergence of new materials and new processes, the emergence of jaw crushers has solved this problem well. The crusher is not only low noise. Output is still higher.

Previous: What are the models of four-toothed roller crushers?

Next: Main wear parts of jaw crusher production line